Adjusting Screw, Spacer Screw, Bright Galvanised, with Cut Tip TX30 (6.0 x 110 mm - Pack of 100)

SCREW REBEL Adjustable spacer screw with countersunk head, milling ribs and cutting notch. Drive: Torx (TX 30) hexagon socket. Areas of application: for millimetre-accurate, adjustable distance regulation of wooden substructures in wood or masonry (see processing instructions). Areas of application: for wall cladding and ceiling cladding in interior/drywall. The adjustment screws allow a continuous distance mounting towards the substructure by simply screwing the screws. The countersunk head of the spacer screw has underhead milling ribs, so easy installation of the screw in e.g. the wooden substructure without pre-sinking. The Torx drive ensures ideal power transmission and powerful screwing. Corrosion protection is ensured by the galvanic, bright galvanised steel material. Processing instructions: The screw is screwed into the substructure (wood) through the bearing slat so that the screw is countersunk in the slat. By turning the adjustment screws opposite, the load rating can then be continuously aligned with a screwdriver or screwdriver. Important: Please choose the screw dimensions so that the thread of the adjustment screws is completely screwed into the ground. As a rule, no pre-drilling in wood is necessary due to solid groove part (edge spacing 15 mm). Nevertheless, we recommend carrying out a screw test depending on the wood material. The spacer screws can be used with universal dowels without collar in any masonry.

• For the millimetre-precise alignment of wooden substructures in masonry or wood
• Save time when aligning
• No pre-drilling required for soft wood
• For wall cladding and ceiling cladding in interior finish/drywall.
• The spacer screws can be used in any masonry with universal dowels without collar.
• The countersunk head of the spacer screw has underhead milling ribs
• With Torx drive, galv. Galvanised